Blinds are an essential component of any house, providing privacy, light control, and energy efficiency. However, you must make a point to measure them properly so that they can function efficiently. Taking precise measurements is extremely crucial when planning to place a custom order for the best blinds in British Columbia. Today, we will briefly discuss how to take the measurements of your blinds accurately to ensure a perfect fit.
- A steel measuring tape
- A pen or pencil and one loose sheet to write down your measurements
- A level or plumb line
Decide Where You Wish to Install the Blinds
The very first step in measuring your blinds is to ponder where you want to place them. Measure the area where you intend to have them installed, taking into due consideration any potential obstructions, such as molding and windowsills. Do not forget to note down your measurements on a piece of blank paper with the help of a pen or pencil.
Carefully Measure the Width of Your Window
Measuring your window width involves measuring the width of your window frame from one side to another. Make sure to measure the width at the top, middle, and bottom of your window. This is because the window frame in question may not be perfectly square and measuring at different points will help you determine whether there are any possible variations or not.
Measure the Height of Your Window with the Same Accuracy
You will need to measure from the top of the window frame to its bottom when measuring the height of a window. Remember to measure at different points to identify any likely variations as explained before.
Accurately Measure the Depth of Your Window Frame
Measure the depth of the window frame from the front to the back to ensure that the best blinds in British Columbia you are going to shop for will fit inside the window frame without obstructing any window part.
Measure for an Inside Mount or an Outside Mount with the Same Precision
Once you have completed measuring the width, height, and depth of the window frame, you will need to decide if you want to install the blinds inside or outside the window frame. An inside mount essentially means that your blinds will fit inside the window frame, while an outside mount suggests that they will be installed outside the same.
Deduct one-quarter inch from the width of your window frame to allow for clearance when choosing an inside mount. This will ensure that you can install the blinds easily inside the window frame without any potential obstructions. However, for an outside mount, add two to three inches to the width as well as the height of your window frame to ensure that the blinds will fully cover the window along with providing adequate privacy and light control.
Check the Level of Your Window
Check your window level before finalizing the measurements for the best blinds in British Columbia. Utilize a level or plumb line to assess if the window is perfectly level, and if it is not, you will need to alter your measurements accordingly to ensure that the blinds will hang straight.
Call Great Blinds Canada now to receive a no-obligation price quotation instantly over the phone!